46
NS-55D421NA16 Insignia 55" 1080p 60Hz LED TV
www.insigniaproducts.com
Setting the power on picture mode
You can set the picture mode your TV uses when you
turn it on.
1
Press
MENU
.
2
Press
W
or
X
to highlight
HELP
, then press
T
or
ENTER
.
3
Press
S
or
T
to highlight
Power on in Vivid
Mode
, then press
ENTER
or
X
.
4
Press
S
or
T
to highlight
On
(when you turn on
your TV, it will be in
Vivid
picture mode) or
Off
(when you turn on your TV, it will be in the picture
mode it was in before you turned it off ), then press
ENTER
.
5
Press
MENU
to return to the previous menu, or
press
EXIT
to close the menu.
Adjusting the sound
This section covers:
• Adjusting sound settings
• Selecting the audio out mode
• Playing TV audio only
Adjusting sound settings
You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
1
Press
MENU
.
2
Press
W
or
X
to highlight
AUDIO
, then press
T
or
ENTER
.
3
Press
S
or
T
to highlight an option, then press
ENTER
or
X
to access the option. You can select:
•
Audio Mode
—Selects the sound mode. You can
select:
•
Standard
—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
•
Theater
—Enhances treble and bass for a rich
sound experience. This setting is good for
watching DVDs, Blu-ray discs, and HDTV.
•
Music
—Preserves the original sound. This
setting is good for listening to music.
•
News
—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
•
Custom
—Lets you manually adjust sound
settings.
•
Balance
—Adjusts the balance between the left
and right audio channels.
•
Bass
—Adjusts the low sounds.
•
Treble
—Adjusts the high sounds.
•
TV Speakers
—Selects where to play TV audio.
When you connect headphones to your TV,
audio plays through both the headphones and
the TV speakers. You can select:
•
Auto
(default setting)—Automatically turns
off the TV speakers when you connect a
device to the
/ AUDIO OUT
jack. When
you disconnect the device, the TV speakers
turn on automatically.
•
On
—Always plays the audio through the TV
speakers. If a device is connected to the
/ AUDIO OUT
jack, the audio is played
through both the TV speakers and the
device.
•
Off
—Turns off the TV speakers and plays the
audio only through the device connected to
the
/ AUDIO OUT
jack. If you disconnect
the device, the TV speakers remain turned
off.
• Digital Audio Format/Audio Delay
—Adjusts
the digital audio sent to an external audio
system. You can select:
•
Audio Format
—Selects the digital audio
format sent to an external audio system. You
can select:
•
Pass Thru
(to pass through the original
digital audio sound).
•
PCM
(to output audio in 2-channel
stereo).
•
Audio Delay
—Fine tunes the audio when it
is not in sync with the video.
