5
Insignia NS-BT300F Bluetooth Adapter
www.insignia-products.com
Using your Bluetooth adapter
Connecting your adapter to the speaker system
To connect your adapter to the speaker system:
1
Plug your speaker system into an AC power outlet.
2
Turn on your speaker system.
3
Select
iPod
mode by pressing the
source/mode
button on your
speaker system.
4
Insert your speaker system’s iPod connector plug into the
Bluetooth adapter’s connector port. The adapter’s LED indicator
blinks slowly and the device name
NS-BT300F
appears on the list
of your Bluetooth device.
5
Enter in the default password
0000
to accept the pair.
6
Select a track and press the
Play
button on your Bluetooth device.
Your track plays through the speaker system.
Caution
This adapter does not support speaker systems operated by
batteries. Make sure that your speaker system is connected
to an AC power outlet with an AC/DC adapter before
connecting to the adapter.
Note
Your Bluetooth device and this adapter must be within
30 feet of each other.
Note
Check the User Guide that came with your Bluetooth device
to learn about creating a Bluetooth connection with that
device.
Note
You can change the password on your Bluetooth device
after the pair is successfully set up.
Note
During the pair mode period, the adapter’s LED indicator
blinks at a faster rate. When an active link is established
between the device and the adapter, the adapter’s LED
indicator stays solid.
Note
Repeat step 4 and step 5 if the adapter’s LED indicator
keeps blinking.
