8
NS-D160A14 Insignia DVD Player
www.insigniaproducts.com
Connecting power
To connect power:
• Plug the power cord into a power outlet.
Using component video (best)
To connect your DVD player using component
video:
1
Make sure that the power cords for your DVD
player and the TV are unplugged.
2
Connect a component video cable (not
included) to the
COMPONENT VIDEO OUT
jacks on the back of your DVD player and to the
component video in jacks on the back of the TV.
3
Connect an analog audio cable to the
AUDIO
OUT
jacks on the back of your DVD player and
to the audio in jacks on the TV.
4
Plug in the power cords, then turn on the TV and
your DVD player.
5
Select the video input source on the TV that you
connected your DVD player to. For more
information, see the documentation that came
with the TV.
Cautions
•
Your DVD player should only be operated from
the power source indicated on the label.
•
Always unplug the power cord from the power
outlet when you will not be using your DVD
player for an extended period of time.
MADE IN CHINA
MODEL: NS-D160A14
120V~ 60Hz 11W
Manufactured for Insignia Products
7601 Penn Ave S. Richfield, MN 55423 USA
S/N:
DVD PLAYER
Best Buy
www.Insigniaproducts.com
This product complies with FDA Rule
21CFR Chapter 1, Subchapter J in
effect at date of manufacture.
CAUTION- VISIBLE AND INVISIVLE LASER RADIATION
WHEN OPEN.
DO NOT STARE INTO BEAM.
This Class B digital apparatus complies with Canadian
ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Note
The
COMPONENT VIDEO OUT
jacks share the
AUDIO OUT
jacks with the
VIDEO OUT
jack.
Analog audio cable
Cable connectors are often color-coded to match color-coded jacks.
Component video cable
Back of player
12-1123_NS_D160A14_MAN_V1_EN .book Page 8 Wednesday, April 3, 2013 2:54 PM
