16
9” Dual-Screen Portable DVD Player
www.insigniaproducts.com
2
Plug the connectors on an RCA cable (not included) into the connectors on
the other end of the AV cable. Make sure that the colors on the connectors
match.
3
Plug the other end of the RCA cable into the
AV
jacks on the TV or monitor,
making sure to match the colors on the connectors with the jacks on the TV
(or monitor).
4
Turn your TV or monitor on.
Using your player
Turning on your player
To turn on your player:
1
Slide the
ON/OFF
switch on the side of your player to the
ON
position.
2
The start-up picture (DVD VIDEO) appears on the screen.
3
After use, slide the
ON/OFF
switch to the
OFF
position.
Playing a DVD or audio CD
To play a disc:
1
Make sure that your player is connected to power.
2
Slide the
ON/OFF
switch to the ON position.
3
Slide the
OPEN
switch. The disc tray opens.
4
Place a disc, label side up, in the disc tray, then close the tray. The disc starts
playing automatically.
Controlling DVD or audio CD playback
To control disc playback:
•
Press (
STOP
) once to stop playback. Your player remembers where you
stopped. If you press
, your player starts playing at the point where you
stopped.
•
Press (
STOP
) twice to stop playback. If you press
, your player starts
playing at the beginning of the disc.
•
Press
to pause playback. Press this button again to resume playback.
Note
You may have to select the correct input on your TV or monitor.
Note
Most DVDs and your player have region codes that help control
illegal distribution of DVDs. The region code for your player is
1
.
You can only play DVDs with a region code of
1
. The region code
for a DVD is printed on the DVD or the DVD packaging.
NS-D9PDVD15-NS-D9PDVD15-MX_14-0410_MAN_V3_EN.fm Page 16 Thursday, June 26, 2014 6:29 PM
