www.insigniaproducts.com
6
50 or 70 Pint White Dehumidifier
Control Panel
Before using your dehumidifier
1
Remove the power cord storage bracket from your dehumidifier’s bucket, then insert the power cord storage bracket
into the back of your dehumidifier. The power cord storage bracket will click into place.
#
FEATURES
FUNCTION
1
Full
Lights up when the bucket is ready to be emptied.
2
Defrost
Lights up when the auto defrost function is running. Auto defrost runs when too much
frost builds up on the evaporator coils. The compressor turns off during defrost.
3
Continuous (Cont.)
Press to activate the continuous dehumidifying operation.
4
Turbo
Press to select either Turbo or normal fan speed. Set the Turbo control to high for
maximum moisture removal. Turn off Turbo when your room humidity is at your
preferred level.
5
Timer
Press to set the Power On and Power Off timers.
6
LED display
• Displays the humidity level from 35% to 85% while setting the desired humidity
level.
• Displays the auto start/stop time (0–24) while setting the
Timer.
• Displays the room humidity level from 30% humidity to 90% humidity.
7
Power
Press to turn the dehumidifier on and off.
8
Filter Reset
Lights up after 250 hours of use to indicate when to clean the filter. Press the button
after cleaning the filter to reset the timer and turn off the LED indicator.
9
± buttons
Press to set the dehumidifier’s humidity level and to set the Power On and Power Off
timers from 0 to 24 hours.
Power
cord
storage
bracket
NS-DH50WH9_NS-DH70WH9_NS-DH50WH9-C_17-0857_MAN_V1_EN.fm Page 6 Monday, December 18, 2017 3:01 PM
