background image

4

Insignia Ceramic Tower Heater

www.insigniaproducts.com

17

This heater is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience 
and knowledge, unless the have been given supervision or instruction 
concerning use of the appliance by a person responsible for their 
safety.

18

Children should be supervised to ensure that they do not play with the 
heater.

19

CAUTION: Some parts of this product can become very hot and cause 
burns. Particular attention has to be given where children and 
vulnerable people are present.

20

WARNING: In order to avoid overheating, do not cover the heater.

21

This heater draws up to 1500 W during operation. To prevent 
overloading a circuit, do not plug the heater into a circuit that already 
has other appliances working.

22

It is normal for the plug to feel warm to the touch, however, a loose fit 
between the wall outlet and plug may cause overheating and 
distortion of the plug. Contact a qualified electrician to replace loose 
or worn outlets.

23

The output of this heater may vary and its temperature may become 
intense enough to burn exposed skin. Use of this heater is not 
recommended for persons with reduced sensitivity to heat or an 
inability to react to avoid burns.

24

Do not leave the heater on unattended.

25

This appliance has a polarized plug (one blade is wider than the other). 
To reduce the risk of electric shock, this plug is intended to fit in a 
polarized outlet only one way. If the plug does not fit fully into the 
outlet, reverse the plug. If is still does not fit, contact a qualified 
electrician. Do not attempt to defeat this safety feature.

26

If the supply cord is damaged, it must be replaced by the 
manufacturer, its service agent, or similarly qualified persons in order 
to avoid a hazard.

27

The heater must not be located immediately below a socket-outlet.

28

Do not use this heater near a bath, a shower, or a swimming pool.

29

Do not spray pesticide or any other flammable spray around the 
heater. It could damage the heater.

30

Stop using the heater and unplug it immediately if any unusual smell 
or sounds come from the heater.

31

Do not cover the heater when in use or when not allowed to cool 
completely.

SAVE THESE INSTRUCTIONS

NS-HTTCBK6_15-0373_MAN_V1_ENG.fm  Page 4  Friday, May 8, 2015  11:03 AM

Summary of Contents for NS-HTTCBK6
















Reviews: