background image

We recommend that you use a professional 
electrician to install the USB charger wall outlet. For 
information about electrical specifications, see 

SPECIFICATIONS

.

SAFETY

Warnings: 

•  RISK OF ELECTRIC SHOCK — Use only in dry 

locations and only indoors.

•  All cables should be routed away from the charger 

outlet openings.

•  DO NOT use with any aquarium equipment.
•  DO NOT install in an outlet that is not grounded.

Notes to the installer:

•  This device must be installed in accordance with 

National and Local electrical codes.

•  To prevent severe shock or electrocution, always 

turn power OFF at the service panel before 
working with wiring.

•  This device should be used with copper or 

copper-clad wire. DO NOT use with aluminum 
wire.

•  DO NOT plug this device into a shallow wall box. 

The wall box must be deep enough to house the 
charger outlet. If the box is too shallow, the 
charger outlet will not fit securely into the wall.

PACKAGE CONTENTS

•  3.6A USB Charger Wall Outlet
•  White decora-style wall plate
•  Screws: 2 long and 2 short 

•  Quick Setup Guide

FEATURES

•  Replaces a standard duplex outlet
•  Quickly charges USB devices
•  Tamper-resistant outlets for added safety
•  Provides two USB ports with 3.6A total output
•  Provides two standard 110V power outlets 
•  Works in nearly all installations
•  Compatible with your existing decora wall plate

Before using your new product, please read these instructions to prevent any damage.

INSTALLING THE CHARGER

Warning: DISCONNECT POWER. Failure to do 
so can result in severe injury or death.

 

Make sure that you disconnect power to the 
circuit by removing the fuse from the circuit 
breaker or turning OFF the circuit breaker.

Remove the wall plate and mounting screws 
that cover the old outlet.

Carefully remove the existing outlet from the 
wall box.

Disconnect the wiring from the old outlet. Note 
the wire positions. Connect the charger outlet 
wires the same way.

Connect the wires to the charger outlet: 

 

•  Black lead attaches to the hot wire(s)

 

•  White lead attaches to the neutral wire(s)

 

•  Green lead attaches to the ground wire(s) 

QUICK SETUP GUIDE

3.6A 

USB Charger

Wall Outlet 

NS-HW36A217

Electrical 
outlets (2)

USB ports (2)

Final flat size: 12 × 4.7 in. (304.8 × 119.38 mm)
Final fold size: 3 × 4.7 in. (76.2  × 119.38 mm) 

Hot 

(black)

Neutral 
(white)

Ground 
(green)

NS-HW36A217_16-0670_QSG_V3_FINAL_ENG.ai   1   9/1/2016   3:29:21 PM

NS-HW36A217_16-0670_QSG_V3_FINAL_ENG.ai   1   9/1/2016   3:29:21 PM

Reviews: