6
12-SHEET CROSSCUT PAPER SHREDDER
www.insigniaproducts.com
4
Using the handle on the shredder head, lift and gently place the
shredder head onto the rim of the shredder body. Make certain the
clips on the edge of the body are lined up with the openings
underneath the shredder head. The curved flap-like shape located on
the back of the shredder head should also align and fit properly as
shown.
5
When aligned, gently push down on the shredder head until it sits
flush on the shredder body. (There should be no space between the
shredder head and the shredder body.)
Push down
Push down
Correct fit
Incorrect fit
NS-PS12CC-C_14-0409 MAN_V1_ENG.fm Page 6 Wednesday, April 16, 2014 4:13 PM
