Thank you for purchasing this high quality Insignia USB to Ethernet
Adapter. Use this adapter to instantly connect to a 10/100 Mbps network
from the USB port on your desktop or laptop computer.
PACKAGE CONTENTS
• USB to Ethernet Adapter
• Driver
CD
•
Quick Setup Guide
SETTING UP THE ADAPTER
Note
: The driver software must be installed before you connect the adapter. The
adapter does not need to be connected for the software to install.
To install on a Windows PC:
1
Insert the driver CD into the optical drive on your computer. The
software should run automatically. The initial installation screen opens.
Note:
If the software does not run automatically, locate and double-click
Run.exe
on the driver CD.
2
Click on your operating system, then follow on-screen instructions.
Note:
If the computer has Windows 8, you do not need to install the driver from
the disc. The drivers are installed automatically.
3
When the installation is complete, click
Finish
to restart your
computer and finish the installation.
4
Connect the USB connector on the adapter to an open USB port on
your desktop or laptop computer.
5
Connect a network cable to the Ethernet port on the adapter.
To install on a Mac:
1
Insert the driver CD into the optical drive of your computer. On the
driver CD, locate and click
AX88772.dmg
. Click the
AX88772
icon
( ). The driver setup driver setup dialog box opens.
Quick Setup Guide I
NS-PU98505/NS-PU98505-C
USB to Ethernet Adapter
Before using your new product, please read these instructions to prevent any damage.
