Setup method C: Code search
1
Turn on your target device.
2
Press and hold
SETUP
until your
remote’s LED blinks twice.
3
Press
TELEVISION
or
CABLE / SATELLITE /
STREAMING
to select the mode
you want to set up.
4
Press either
0
(for cable/satellite
streaming) or
1
(for TVs) to select
the device type you want to set up.
5
Press and hold
OK
until your
device turns off . Release the
key when your device turns off .
Setup for that device is complete.
USING YOUR REMOTE
1
Press
TELEVISION
or
CABLE / SATELLITE /
STREAMING
for the device you
want to control.
2
Press the buttons applicable to
that type of device.
Watch TV mode
Note
: To control a soundbar or other
audio device with your remote, see
Adding an audio device
.
While watching TV in
CABLE / SATELLITE / STREAMING
mode, you can:
• Use your remote’s volume and
input buttons to control the
TV. The rest of the buttons will
control the device you’ve added
to
CABLE / SATELLITE /
STREAMING
mode.
• Press (power) once to turn
your set-top box on or off .
OR
• Press and hold (power) for
two seconds to turn both your
set-top box and your TV on or off .
To turn off watch TV mode:
1
Press and hold
SETUP
until your
remote’s LED blinks twice.
2
Press
CABLE /
SATELLITE / STREAMING
twice.
The LED blinks four times.
Watch TV mode is turned off and
your remote will not control your
TV.
