Setup method C: Code search
1
Turn on your target device.
2
Press and hold
SETUP
until your
remote’s LED blinks twice.
3
Press
TELEVISION
or
CABLE / SATELLITE /
STREAMING
, or
BLURAY/
DVD
to select the mode you want
to set up. The LED stays lit.
4
Press either
0
(for cable/satellite/
streaming),
1
(for TVs), or
2
(for
Blu-ray/DVD) to select the device
type you want to set up.
5
While pointing the remote toward
your target device, press and hold
OK
until your device turns off .
Release the key when your device
turns off . Setup for that device is
complete.
LEARNING FUNCTIONS
FROM ANOTHER REMOTE
You can learn any function from your
original (working) remote control.
Creating a learned function
1
Make sure that your remote is
programmed to the device you
want to control. See “Programming
your remote.”
2
Place your original and new
remotes on a table with their IR
sensors 1-2" apart.
3
With your new remote, press and
hold
SETUP
until the LED blinks
twice.
4
With your new remote, press
9
,
7
,
5
.
5
With your new remote, press
TELEVISION
or
CABLE /
SATELLITE / STREAMING
, or
BLURAY/DVD
for the device
you want to learn a function from.
6
With your new remote, press the
button you want to add a function to.
The LED blinks continuously.
Note
: Functions cannot be assigned to
the setup key or the three device keys.
