7
With your original remote, press the
button with the function you want
to teach. The LED blinks twice.
Note
: If the LED displays a long blink,
the function wasn’t learned. Start from
step 5 to try again.
8
Repeat steps 5-7 for each button
you want to learn.
9
After you have added all the functions,
press and hold
SETUP
on your new
remote until its LED blinks twice.
Deleting a learned function
1
Press and hold
SETUP
until your
remote’s LED blinks twice.
2
Press
TELEVISION
or
CABLE / SATELLITE /
STREAMING
, or
BLURAY/
DVD
for the device you want to
delete a function from.
3
Press
9
,
7
,
6
.
4
Press the button with the learned
function twice. The LED blinks
twice and the button resets to its
original function.
USING YOUR REMOTE
1
Press
TELEVISION
or
CABLE / SATELLITE /
STREAMING
, or
BLURAY/
DVD
for the device you want to
control.
2
Press the buttons applicable to
that type of device.
Watch TV mode
Note
: To control a soundbar or other
audio device with your remote, see
Adding an audio device
.
While watching TV in
CABLE /
SATELLITE / STREAMING
mode,
you can:
• Use your remote’s volume and
input buttons to control the TV. The
rest of the buttons will control the
device you’ve added to
CABLE /
SATELLITE / STREAMING
mode.
• Press (power) once to turn your
set-top box on or off .
OR
• Press and hold (power) for two
seconds to turn both your set-top
box and your TV on or off .
