15
Five-device Universal Remote
www.insigniaproducts.com
•
Press and hold the
SETUP
and
VOL -
buttons until
the LED under the device button blinks four times.
The volume control is now reset.
If you have set up your Insignia universal remote
control to control the volume of a sound bar or audio
device, the Watch TV Activity (see Understanding and
using Activities on page 18) will automatically control
the volume of this device.
Using channel shortcut macros
In addition to their normal functionality, the red,
green, yellow and blue buttons can be reprogrammed
to select your favorite channels by genre. Initially, if
you press each of these buttons, they have the same
function as your original remote. However, you can
reprogram them so that when the buttons are held
down for three seconds they send a channel number,
then when held down again for three seconds, they
will send another channel number. You can group
these channels by genre, such as sports, news, movies,
and kids.
Adding channel shortcut macros
For example, if the first three sports channels are 200,
201, and 239, you can assign shortcuts to these
channels on the red (Sports) button.
1
Select the device you normally use to watch live TV.
For example, the
STB
button to select your set top
box.
2
Hold down the
SETUP
button and the red (Sports)
button until the LED blinks twice.
3
Enter the first channel number. In this case,
200
.
4
Press and release the red (Sports) button.
5
Enter the next channel number. In this example
201
.
RED
GREEN
YELLOW
BLUE
