20
www.insigniaproducts.com
Using the power macro
If you press and hold the
(power) button for two
seconds in any Activity, your remote sends the power
signal to each device within that Activity. For example,
pressing the
(power) button in the default setting
for the Watch TV Activity turns both the TV and set top
box on or off.
Troubleshooting
Specifications
CAUTION:
Do not try to repair your remote yourself. Doing
so invalidates the warranty.
PROBLEM
SOLUTION
The LED does not turn
on when a button is
pressed.
Replace the batteries.
The LED turns on, but
my remote does not
control my device.
• Make sure that your remote is
programmed to your device.
• Make sure that your remote is set
to the correct mode (TV, STB,
STREAM, or BLURAY).
I have tried all of the
codes for my device’s
brand, but none of
them work.
See Setup method 2 - device codes on
page 10.
After programming,
some of my remote’s
functions don’t work
If you still have your original
(working) remote, you can teach your
new remote its functions. See Setup
method 3 - function learning on page
10.
Dimensions (HxWxD)
8.8 x 1.8 x 1.1
in. (223 x 46 x 28 mm)
Range
30 ft. (9.1 m)
Control
Five devices
Power requirements
Two AA batteries (not provided)