8
NS-UZ17WH0 / NS-UZ17SS0 / NS-UZ17SS0-C
NS-UZ21WH0 / NS-UZ21WH0-C
www.insigniaproducts.com
• Allow 7.9 inches (20 cm) of space between the sides of the freezer and the
walls, 3.9 inches (10 cm) between the back of the freezer and the wall, and 11.8
inches (30 cm) between the top of the freezer and the ceiling. This allows for
proper air ventilation. Adjust the feet to keep the freezer level.
• If you locate the freezer next to a fixed wall, allow sufficient space on the hinge
side for the door to swing open.
• Locate the freezer away from direct sunlight and sources of heat, such as a
stove, heater, or radiator. Direct sunlight may affect the acrylic coating and
heat sources may increase electrical consumption. Extremely cold
temperatures may also prevent the freezer from performing properly.
• Avoid locating the freezer in moist areas.
Leveling your freezer
• It is very important for the freezer to be level. If the freezer is not leveled
during installation, the doors may not close or seal properly, causing cooling,
frost, or moisture problems.
• To level your freezer, rotate the leveling feet clockwise (to raise) the freezer or
counter-clockwise (to lower).
Providing a proper power supply
Check your local power source. This freezer requires a 115 V, 60 Hz power supply.
Use a receptacle that accepts the grounding prong. The power cord is equipped
with a 3-prong (grounding) plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the possibility of electric shock hazard from
this freezer. We recommend that the freezer be plugged into an electrical circuit
serving only this appliance and that the circuit cannot be turned off with a switch
or pull-chain.
Note:
Have someone push against the top of the freezer to help take some weight off the
leveling foot, making it easier to adjust.
3-prong receptacle
Receptacle box cover
3-prong plug
Grounding lead
Grounding adapter Receptacle box cover
Screw
Receptacle
Using a 3-prong plug and outlet
Using a grounding adapter
