9
2-in-1 Cordless Stick Vacuum Cleaner
www.insigniaproducts.com
3
When the LED stops blinking and turns on continuously, your vacuum
cleaner is charged and ready to use.
You can leave your vacuum cleaner connected to the charger without
hurting the battery.
Using your vacuum cleaner
1
Lift the vacuum cleaner off of the charging stand.
2
Step on the suction head and tilt the handle back to a comfortable
position.
3
Press the
ON/OFF
button to turn on the vacuum cleaner, then begin
vacuuming.
4
After using your vacuum cleaner, replace it in the charging stand to
make sure that it is sufficiently charged the next time you want to use
it.
Notes
• It is normal for the charger to become warm when charging
your vacuum cleaner.
• If the LED begins blinking twice every second there is a
malfunction in the charging circuit. If this happens, unplug
the charger and send the vacuum in for service.
NS-VCS14SL7_16-0042_MAN_V1_ENG.fm Page 9 Thursday, April 28, 2016 7:58 AM
