11
29-Bottle Wine Cooler
www.insigniaproducts.com
• Do not use an extension cord with your cooler. If the power cord is too short,
have a qualified electrician install an outlet near your cooler. Use of an
extension cord can negatively affect your cooler’s performance.
Using your cooler
Setting the temperature
• Press the temperature up
or down
buttons to increase or decrease the
temperature by one degree. The temperature range is 41° ~ 65° F (5° ~ 18° C).
• Press and hold the temperature up
and down
buttons at the same
time to switch between Fahrenheit and Celsius.
Memory function
When your cooler is turned off, it remembers the currently set temperature and
returns to that setting when it’s turned back on.
Using the display
• When you plug in your cooler for the first time, the display screen turns on for
three seconds, and you hear a start-up tone.
• When you lock your cooler, the display turns on when a button is pressed. It
turns off after 30 seconds if no buttons are pressed.
• In normal mode, the display shows the set temperature.
Lighting your cooler
• Press the light button
to turn the interior light on or off. A beep sounds
when the light is turn on or off.
Locking and unlocking your cooler
• Press the lock button
to lock or unlock the control panel.
Using the wine shelves
• All of the shelves have tabs to engage the cabinet on both sides.
• Any of the shelves can be removed to accommodate larger bottles.
To remove a shelf:
1
Remove all bottles from the shelves.
2
Lift the shelf upward, then gently pull out the shelf.
3
To replace a shelf, place the sides of the shelf back onto the supporting guides
in the cabinet and push back until the shelf tabs slide into place.
Notes:
• A large number of bottles lowers the cooling efficiency of your cooler.
• When you put several bottles of wine in your cooler at one time, the
temperature in your cooler may rise temporarily.
• Adjust the thermostat setting by one increment at a time. Allow several
hours for the temperature to stabilize between adjustments.
• The screen display always shows the set temperature. When adjusting the
temperature, the temperature display blinks to indicate that the
temperature is being adjusted.
CAUTION:
Make sure that the tabs are firmly engaged in the supporting guides
before storing any bottles.
