PACKAGE CONTENTS
• 45-bottle wine cooler
• Wine
tote
•
Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
FEATURES
• 45-bottle
capacity
• Mechanical button with LED display
• Sliding wood shelves (5)
• Wood wine basket (1)
• Interior LED light
• Adjustable leveling feet (2)
Control and display panel
QUICK SETUP GUIDE
45-Bottle Wine Cooler
NS-WC45BK7
FIND YOUR
USER GUIDE
ONLINE!
Go to www.insigniaproducts.com, then click
Support & Service
.
Enter
NS-WC45BK7
in the box under
Manual, Firmware, Drivers
& Product Information
, then click
►
.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this appliance near water.
6 Clean only with a damp cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the appliance.
11 Do not attempt to modify or extend the power cord of this appliance.
12 Unplug this appliance during lightning storms or when it will not be used for long periods of time.
13 Make sure that the available AC power matches the voltage requirements of this appliance.
14 Do not handle the plug with wet hands. This could result in an electric shock.
15 Unplug the power cord by holding the plug, never by pulling the cord.
16 Do not turn the appliance on or off by plugging or unplugging the power cord.
17 Turn off the appliance before unplugging it.
18 Refer all servicing to qualified service personnel. Servicing is required when the appliance has been
damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate
normally, or has been dropped.
19 To reduce the risk of fire or electric shock, do not expose this appliance to rain, moisture, dripping, or
splashing, and no objects filled with liquids should be placed on top of it.
Grounding requirement
This cooler must be grounded. This wine cooler is equipped with a cord having a grounding wire with a
grounding plug. The plug must be inserted into an outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or
service person if the grounding instructions are not completely understood, or if doubt exists as to whether
the cooler is properly grounded.
SETTING UP YOUR COOLER
Before using your cooler
• Remove the exterior and interior packing.
• Let the wine cooler stand upright for approximately one half hour before connecting it to
power. This reduces the possibility of a malfunction in the cooling system from improper
handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Find a suitable location
• This cooler is designed to be free standing only, and should not be recessed or built-in.
• Place your cooler on a floor, countertop, or cabinet that is strong enough to support the
cooler when it is fully loaded.
• Allow five inches of space between the back and sides of the cooler and any surrounding
walls. This allows the proper air ventilation. Adjust the feet to keep the cooler level.
• Locate the cooler away from direct sunlight and sources of heat (stove, heater, radiator, and
so on). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Ambient temperature below 50°F (10°C) or above 85°F (29.4°C) will hinder
the performance of this cooler. This cooler is not designed for use in a garage or any other
outside installation.
• Avoid locating the cooler in moist areas.
Level your cooler
• It is very important for the cooler to be level
in order to function properly. If the cooler is
not leveled during installation, the door
may not close or seal properly, causing
cooling, frost, or moisture problems.
Caution
: Do not stack one cooler on
top of another. If you have more than
one cooler, each cooler should rest
firmly on the floor.
• To level your cooler, you may either
turn the leveling foot clockwise to raise
that side to the cooler or turn it
counter-clockwise to lower that side.
Leveling feet (2)
Door handle
Glass door
Light control switch
Wooden shelf
Control and
display panel
Light and
power buttons
Upper zone
display
Upper zone
temperature
buttons
Lower zone
display
Lower zone
temperature
buttons
