To check tub operation.
The button at the rear of the tub behind head rest as you look from
outside is on / off whirlpool
The button towards the front of the tub head rest as viewed from
outside is air bleed. This increases power by bleeding air to the sys-
tem but remember, prolonged use of air cools the bath down rap-
idly!!
For the latest fitting instructions please visit
www.insigniarange.co.uk
The underwater light operation is activated by pressing the light
button (number 5 on the previous page) on the control panel. This
is connected into the same circuit as the roof light.
Sealing your shower
You will now need to apply a final sealing of panels built and joints
made to ensure integrity while in use. If you have sealed as in-
structed correctly at the time of build no water leaks will be pre-
sent. ARE YOU CONFIDENT? If not NEATLY bead along vertical and
horizontal joints. Remember the key is unbroken bead and very
neatly otherwise the sealer will start to “off colour” in months to
come. In any event we suggest beading internally the tub to the
shower frame.
For the latest fitting instructions please visit
www.insigniarange.co.uk
33 34
