P3-NSU GARBAGE GRINDER
Food Waste Disposal System
DESIGN
The P3-NSU waste disposal system is a
self-contained system for size reduction
of food wastes including table and galley
scraps, paper, cardboard and assorted
small bones at rates of up to 200 pounds
per hour, making the waste suitable for
overboard discharge in a water borne
slurry.
It is designed for daily use in a naval
shipboard environment with a minimum
of automatic controls to reduce downtime
associated with the maintenance of such
controls. It is designed to withstand the
occasional accidental injection of hard
non-pulpable objects such as silverware,
glass, or small metal objects. Small non-
pulpable objects that are rejected by the
cutting mechanism will collect around the
inside periphery of the unit for removal
during manual cleaning.
The system is designed for manual
feeding but must be installed under an
existing “dresser table”, under a new
scrapping table, or under a sink.
All P3-NSU units are provided with inlet
water flow regulators and valves. An
outlet water dam, installed in the
discharge line of the unit, maintains an
optimum water level in the pulper.
Operation of the food waste disposal
system is controlled through an electrical
control panel and a “start/stop” push-
button station.
Live Tech Service is Available
24 hours/day 7 days/week
800-344-4802
service@insingermachine.com
10” diameter
access hole
in table
Scrapping table
dresser or sink
Finished Deck
14” diameter
34”
To
drain
Bottom
of
table
top
22 3/4”
25 3/8”
6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800-344-4802
w w w . i n s i n g e r m a c h i n e . c o m
