9
4. MOUNTING THE TANK
PROPERTY DAMAGE
Tank must be located within 16" (41 cm) of faucet
and 84" (213 cm) or less of a GFCI outlet, to
accommodate the supplied 7' cord. DO NOT
extend plumbing or electrical lines.
NOTICE
3. INSTALLING THE FAUCET
PROPERTY DAMAGE
Do not pinch wires or tubing.
NOTICE
4
Feed hose, sensor wire and threaded sleeve(s)
into hole until faucet rests on deck/splash.
1
5
2
From underneath or behind sink, install washer(s)
and large nut(s) onto threaded sleeve(s). Use an
adjustable wrench to secure.
2
2
7
3
1
Screws provided are for use in wood studs or
cabinets only. Use wall anchors for installation
into drywall. Turn screws into pre-drilled holes,
leaving 1/4" (6 mm) exposed. Hang the tank
on the screws. Tighten the screws with only
1/2 turn clockwise.
A
B
1
1
6
3
2
From underneath the sink, place tank against
the wall and mark hole locations. Pre-drill
1/8" (3 mm) pilot holes at marks.
C
D
