background image

Limited Warranty 

InSinkErator®, a division of Emerson Electric Co., (“

InSinkErator

” 

or “

Manufacturer

” or “

we

” or “

our

” or “

us

”) warrants to the original 

purchaser only (“Customer” or “you” or “your”), subject to the 
exclusions below, that your InSinkErator® PowerRinse® Waste 
Collection System (the “

InSinkErator Product

”) will be free from 

defects in material and workmanship for one year from the original 
date of purchase (the “

Warranty Period

”). This limited warranty 

terminates if the original purchaser transfers the InSinkErator Product 
to any other person or entity.

What is Covered

This limited warranty includes repair or replacement of your 
InSinkErator Product, accessories if included in the original 
InSinkErator Product package, and all replacement parts and 
labor costs if provided by an authorized InSinkErator service 
representative.

What is not Covered

This limited warranty does not extend to and expressly excludes:
•  Losses or damages or the inability to operate your InSinkErator 

Product resulting from conditions beyond the Manufacturer’s 
control including, without limitation, accident, alteration, misuse, 
abuse, neglect, or negligence (other than Manufacturer’s).

•  Wear and tear expected to occur during the normal course of use, 

including without limitation, cosmetic rust, scratches, dents or 
comparable and reasonably expected losses or damages.

•  Failure to install, maintain, assemble, or mount the InSinkErator 

Product in accordance with Manufacturer’s instructions or local 
electrical and plumbing codes, faulty or improper electrical 
installation, faulty or improper plumbing installation, clogged drain 
lines, or an improperly sized unit (as specified by InSinkErator).

What we will do to Correct Problems

To file a warranty claim during the Warranty Period, you may call Toll 
Free 1-800-845-8345 for the nearest InSinkErator Authorized Service 
Agency or to reach Technical Support, or you may visit our website at 
www.insinkerator.com. 

The following information must be provided as part of your warranty 
claim: your name, address, phone number, your InSinkErator Product 
model and serial number. You will be required to submit supporting 
documentation of the date of purchase.

Manufacturer or its authorized service representative will determine, 
in its sole and absolute discretion, if your InSinkErator Product is 
covered under this limited warranty. Only an authorized InSinkErator 
service representative may provide warranty service. InSinkErator 
is not responsible for warranty claims arising from work performed 
on your InSinkErator Product by anyone other than an authorized 
InSinkErator service representative.

If a covered claim is made during the Warranty Period, Manufacturer 
will, through its authorized service representative, and at 
Manufacturer’s or its authorized service representative’s sole 
discretion, either repair or replace your InSinkErator Product. If your 
InSinkErator Product is replaced, the warranty on the replacement 
InSinkErator Product will be limited to the unexpired term remaining 
in the original Warranty Period. 

YOUR SOLE AND EXCLUSIVE 

REMEDY UNDER THIS LIMITED WARRANTY SHALL BE LIMITED 
TO REPAIR OR REPLACEMENT OF THE INSINKERATOR 
PRODUCT.

No Other Express Warranty Applies

THE LIMITED WARRANTIES PROVIDED ABOVE ARE THE SOLE 
AND EXCLUSIVE WARRANTIES PROVIDED BY MANUFACTURER 
TO THE ORIGINAL PURCHASER, AND ARE IN LIEU OF ALL 
OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR 
IMPLIED, WHETHER ARISING BY OPERATION OF LAW OR 
OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES 
OF  MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE, WHETHER OR NOT THE PURPOSE HAS BEEN 
DISCLOSED AND WHETHER OR NOT THE INSINKERATOR 
PRODUCT HAS BEEN SPECIFICALLY DESIGNED OR 
MANUFACTURED FOR YOUR USE OR PURPOSE.

Limitation of Liability

TO THE EXTENT PERMITTED BY LAW, IN NO EVENT 
SHALL MANUFACTURER OR ITS AUTHORIZED SERVICE 
REPRESENTATIVES BE LIABLE FOR ANY INCIDENTAL, SPECIAL, 
INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING 
ANY ECONOMIC LOSS, WHETHER RESULTING FROM 
NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE 
INSINKERATOR PRODUCT OR THE MANUFACTURER’S OR ITS 
AUTHORIZED SERVICE REPRESENTATIVE’S NEGLIGENCE. 
MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES 
CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT, 
REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF 
ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT, 
NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR 
OTHERWISE), SHALL MANUFACTURER'S LIABILITY TO YOU 
EXCEED THE PRICE PAID BY THE ORIGINAL OWNER FOR THE 
INSINKERATOR PRODUCT. 

The term "consequential damages" shall include, but not be limited 
to, loss of anticipated profits, business interruption, loss of use or 
revenue, cost of capital or loss or damage to property or equipment.

Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation may not apply to you. 
This warranty gives you specific legal rights and you may also have 
other rights which vary from state to state.
 

InSinkErator

®

 may make improvements and changes in the specification at any time, in its sole discretion, without notice or obligation and further 

reserves the right to change or discontinue models. ©2015 InSinkErator

®

, a business unit of Emerson Electric Co. All rights reserved.

Summary of Contents for PowerRinse PRP Series





















Reviews: