11
12
In the live video window click on the calibration button , and then
click and drag to 2mm length, a small window pop up, enter the actual
length(The example is 2mm) to click “OK” Button.
The
software
will
automatically
calibrate
the
scale
of
magnification
and
will
show
the
calibrated
scale
of
magnification
at
the right
‐
hand
box
of
calibration
button
as
below
:
Now
the
calibration
is
completed
,
you
can
make
measurement
features
accurately
on
taken
photos
or
real
‐
time
video
at
this
focus
point
(Don’t subsequently adjust the “Focus & Magnification
adjustment wheel”)
.
If the new photo object is not in focus, please
only adjust the distance between the microscope and the object till
the photo is clear, and then capture the photo to measure it.
Line measurement:
This allows you to measure the linear distance between two
points. Simply click and drag to the desired length, and click
again to finish.
Point
to
Line
Measurement
This allows measurement of a line 90 degree from a certain line.
Simply create a line to represent the base by clicking once to
start, drag, and then click again to set the endpoint. Branch off
from the base line to start measuring the line that is 90 degree
from the base line and a final click to finish the measurement.
Continuous
Line
Measurement
This
allows
measurement
of
the
distance
between
multiple
connecting
lines
.
Simply
click
and
drag
to
form
one
section
of distance
,
click
again
to
start
another
section
.
Continue
until
the
total
desired
distance
is
measured
.
Double
‐
click
to
finish
.
Polygon
Measurement
This
allows
measurement
of
a
polygon
.
Simply
click
and
drag
to
form
the
desired
length
,
and
click
again
to
start
the
next
section
,
double
‐
click
to
finish
the
polygon
measurement
.
Radius
of
Circle
Measurement
This allows you to measure the circumference, area, and radius
of a circle. Simply click and extend out to the desired radius.
Diameter
of
Circle
Measurement
This allows you to measure the circumference, area, and radius
of a circle. Simply click and extend out to the desired diameter.
Three
Point
Circle
Measurement
This allows the measurement of the circumference, area, and
radius of a circle. Simply click on any three points on the circle
you wish to measure.