4
Inspire Home Automation
www.inspirehomeautomation.co.uk
contact@inspirehomeautomation.co.uk
01202 798390
Green
Green or
Flashing
Yellow
Green or
Yellow
Plug the Gateway into a spare ethernet port on the router using the supplied cable, then plug the supplied
power adapter into the back of the gateway and plug into a spare power outlet. Allow 30 seconds for the
Gateway to power up. You should see a Green Power Light and a Flashing Amber or Green centre light.
The Radio light may be Amber or Green, depending on whether other units are switched on.
If the Middle light is not on, then the device does not have a valid connection to our Web Servers. Try the
following.
• Move our device to a different port. Some routers only have a single 10Mbps port. Try all the ports,
especially port 1 and port 4.
• Do you have a valid internet connection? Check by plugging in another device.
• Unplug both the Router and the Gateway. Wait 30 seconds, then plug the router back in. Wait 2
minutes, then plug our Gateway back in.
Installation - Gateway
