5
Versa Bath Transfer
ASSEMBLY OF THE TRANSFER SYSTEM
Seat Assembly:
1. Attach the backrest to the seat bottom
with the provided bolts (Fig. 6) in the bag
attached to this instruction.
2. Attach the armrests to the back using the
enclosed bolts and internal spacer (Fig. 7).
Seating and Rolling Base Assembly:
1. Insert the guide rail hooks into the guide
rails and slide the seating frame assembly
onto the rolling base (Fig. 8). Be sure to
slide the seating all the way until the
safety locking latch clicks into position
on the base (Fig. 9).
2. Slide the footrests onto the footrest
clamps by aligning the buttons on the
footrests with the notches on the clamp
(Fig. 10).
Note: If you need to change the way the
seating faces, you may remove the rolling
base, rotate it 180° and insert the guide
rail hooks into the guide rails, and slide the
seating frame assembly back onto the rolling
base.
Figure 7
Notch
Figure 10
Figure 6
Figure 8
Figure 9
