3
www.inspiry.com.cn
Click the button “Generate QR-code” and aim the QR-code to the scan window of the device. The device
will prompt “The device is under configuration, please wait for a moment”, then the device will restart
automatically. The printer will print “Welcome powered by Inspiry”. The light of device will change from
red to green, and finally blink with white light and green light, that means the device is connected to
network successfully.
QR-Code for Configuration Webpage
3.
Storage and Transport
3.1 Storage Requirements
Relative humidity is from 5% to 95%. Keep it in normal temperature. Keep it away from acid, alkali and
other corrosive gas. Prevent direct sunlight, rain water invasion, and extrusion deformation.
3.2 Transport Requirements
When transport or connect device, please handle it gently, avoid strong vibration. Please do not scratch
or collide the outer case or glass, so as not to affect the appearance and use.
4.
Maintenance Instruction
4.1 Please regularly check the outer case, no crack, no deformation, and no corrosion on the surface.
4.2 Check the tightness of the screws which are used for fixation. Make sure no screw to fall off.
4.3 Check the glass of device regularly, keep the glass clean and spotless.
