Inspiry Smart Box V User Manual Download

Page: 6 / 8

under configuration, please wait for a moment”, then the device will restart automatically. The printer

will print “Welcome powered by Inspiry”. The light of device will change from red to green, and finally

blink with white light and green light, that means the device is connected to network successfully.

Code for Configuration Webpage

Storage and Transport

3.1 Storage Requirements

Relative humidity is from 5% to 95%. Keep it in normal temperature. Keep it away from acid, alkali and

other corrosive gas. Prevent direct sunlight, rain water invasion, and extrusion deformation.

3.2 Transport Requirements

When transport or connect device, please handle it gently, avoid strong vibration. Please do not scratch

or collide the outer case or glass, so as not to affect the appearance and use.

Maintenance Instruction

4.1. Regularly inspect whether the device surface is smooth and clean, and free of cracks,

deformation and corrosion on the surface.

4.2. Inspect the tightness of the screws used to fix the enclosure and confirm no screws fall off.

4.3. Inspect the glass of the device and confirm that its surface is smooth and free of dirt.

4.4. Keep the device in a location not exposed to direct sunlight, and keep it away from magnetic

interference in operation.

4.5 If the device will not be used for a long time, cut off the power supply and store the device in a

Summary of Contents for Smart Box V







