8
Assembly steps
STEP 1
Attach the front stabilizer (2) to the main frame (1) with flat washers (33), spring
washers (32) and
Allen C.K.S. half thread screws (31).
STEP 2
Attach the rear stabilizer (3) to the main frame (1) with flat washers (33), spring
washers (32) and Allen
C.K.S. half thread screws (31).
STEP 3
1. Attach the decoration strip (89) to the upper upright post (4), take the upright post cover (16)
off the main frame (1) and attach it to the upper upright post (4).
2. Connect the motor communication wire (24) and the console communication wire (25).
3. Attach the upper upright post (4) to the main frame (1) with a curved washer (35), spring
washer (32) and Allen C.K.S. full thread screw (34) at the front. Use a flat washer (33), spring
washer (32) and Allen C.K.S. full thread screw (37) at the opposite side and flat washer (33),
hex self-locking nut (36) and a half thread screw (34) at the sides.
4. Attach the upright post cover (16) and the upright post decoration strip (89) to the main frame
(1).
5. Attach the bottle holder (12) to the upper upright post (4) with self-tapping screws (38).
6. Attach the axle (15) to the upright post (4).
