12
ASSEMBLY INSTRUCTIONS
STEP 1
•
Place the main frame (2) on the basic frame (1), secure with two Allen cylinder head half-
thread screws (95), two spring washers (52), two curved washers (49), four Allen cylinder
head half-thread screws (26), four spring washers (52) and four flat washers (47).
STEP 2
•
Pull out the communication line (88) from hole of the console fix group (3).
•
Assemble the console fix group (3) on the main frame (2). Secure with one curved washer
(50), one spring washer (51), one Allen pan head full-thread bolt (68), four flat washers (44),
two hex self-locking nuts (57), two Allen pan head half-thread bolts (70).
•
Attach the left top cover (16), right top cover (17) and the air outlet cover (21). Secure with six
Phillips CKS self-tapping screws (62).
•
WARNING!
After the communication line is connected, insert all lines into the upright post to
avoid line clamping. First put all bolts and washers onto the frame holes and secure them.
