29
MODE KEY
1. Select function (TIME, DIST, CAL, PULSE) etc.
2. After selecting or putting a preset value, press this key to go to the next step.
RESET KEY
1. RESET: Press RESET key when the system is under the STOP state. Enter the main function
window to select (WATT, HRC, USER, PROGRAM, MANUAL function) and clear previous
record of TIME, DISTANCE, CALORIES, PULSE, WATT).
2. TOTAL RESET: Press RESET key 2 seconds to enter to just power on state, that is TOTAL
RESET. System gives 1-second sound alarm and enters setting mode 2 seconds later. The
system is stand by LEVEL 1, waiting for the preset.
START/STOP KEY
Press this key to start exercise, press it one more time to stop the console.
RECOVERY
1. If there is no PULSE input, this key is invalid.
2. In the START or STOP state it displays the PULSE value. Press the RECOVERY KEY to:
a) Conduct RECOVERY function, display only TIME and PULSE window. Voltage value of
LEVEL will be reduced to LEVEL 1 immediately.
b) The TIME window displays 0:60 (Pic 43). Start counting down. If there is no pulse input
during the time count-down, the window displays F1~F6, when the TIME counts down to
0. Press the RECOVERY key to resume display.
3. Press this key during time count-down and resume normal display.
Pic. 43
Pic. 44
BODY FAT
1. Under the STOP state, after finishing user information, this function is ready.
2. Press this key to test the body fat ratio. Put your hands onto handlebar and the test result will
be displayed on the window (Pic. 45
– 47). If the window displays E-1 (Pic. 48), it means you
