background image

 

 

DRIVING TECHNIQUE 

 

Know the scooter before first use and test your ability to control this product. 

 

Turn continuously and brake safely having enough free space. 

 

Practice your first ride in an open area without obstacles. 

 

Never let distract your mind during riding. 

Foot position

 

– put your foot on the board as close to the front part as possible. Let your other foot on 

the  ground.  Make  sure  the  route  is  clean  and  free.  To  start  riding,  push  yourself  forwards  (like  on  a 
non-motorized  scooter).  Push  off  with  the  foot  that  is  on  the  ground.  Immediately  after  pressing  the 
throttle  downwards,  tilt  your  body  forwards  as  a  prevention  from  falling  back  while  increasing  your 
speed. Avoid excessive body pressing on the handlebars during speed changing. One foot is at front 
and the second one is back. It is comfortable to place the feet like on a skateboard for optimal stability. 

NOTE:

 Riding on a scooter can be dangerous. You use the product on your own responsibility and be 

familiar with all the safety precautions before riding. 

Turning

 

–  it  is  the  same  as  on  a  surf  or  snowboard.  The  handlebar  should  be  parallel  to  the  body. 

Before turning look at the approaching direction to be sure the operation is safe. 

Braking

 

–  shift  your  weight  backwards  so  that  the  braking  is  realized  through  your  feet  and  not 

through  handlebar  and  steering  system.  Learn  well  to  adjust  the  gravity  center  during  stopping  to 
avoid turning over or excessive wearing of the braking and steering system 

CONTROLS 

Always hold the handlebar with both hands. 

There is an accelerator on the right side of the handlebar. 

There is an electronic brake on the left. The foot brake is located at the rear. 

You can set the maximum speed using the MODE button on the display. 

BATERRY 

12 months warranty for battery life 

– we guarantee that battery's nominal capacity does not fall 

below 70% of its total capacity within 12 months of the bike

’s sale. 

 

For  proper  operation  and  safe  use  of  the  battery,  follow  the  instructions  in  the  manual.  Stop 

using  the  battery  immediately  if  the  battery  is  damaged,  leaks  liquid  or  you  smell  abnormal 
odor. 

 

Battery  lifespan  is  limited.  If  you  use  a  battery  that  exceeds  normal  lifespan,  the  charging 

frequency may increase, and the scooter range will be reduced. 

 

Do not open or throw of the battery in a fire. Do not insert foreign objects into the battery. 

 

Do not touch the battery with metal objects. The battery may explode or be damaged. 

 

Use only the original charger. 

 

Follow local regulations and laws while driving. 

 

You can charge the battery continuously. 

 

The ideal batt

ery charging temperature is +10 ° C to +30 ° C. 

 

If you use the battery for an extended period, its temperature will be higher. This is a normal 

battery condition. 

 

If you use the battery in a cold environment, the range is lower. 

Summary of Contents for Futurisco ES1354














Reviews: