14
FAULTS AND ERROR CODES
Possible cause
Possible solution
The
system
is
not
working
Not plugged in or turned on
Plug in or start up
Safety key not correctly inserted
Reinsert the safety key
Short circuit
Check the inputs and outputs of the
terminal and communication cables
Converter
not
plugged
in
or
damaged
Check or replace the converter
Sudden stop
Safety key not correctly inserted
Reinsert the safety key
System Error
Contact supplier
The button does not
work
The button does not respond
1. Replace button and cables, 2.
replace PCB, 3. replace console
Damaged or incorrectly connected
cable
Check cable condition, replace or
reconnect
E-01
Damaged console
Replace the console
E-02
Wrong wiring or motor damage
Replace the motor cables or replace
the motor
E-03
Damaged driver
Replace the driver
E-04
The belt adjusts the incline
The message disappears after the
incline setting
E-05
Increased friction
Lubricate the belt
Damaged driver
Replace the driver
Damaged engine
Replace the engine
E-06
Damaged cables or engine
Check the wiring of the motor
cables or replace the motor
No pulse displayed
Check the cable connections
1. Check the connection. 2. Replace
the cables
Short circuit of the console
Replace the console
TRANSPORT
Before moving, lower the belt incline to the lowest position and unplug it.
Raise the back of the treadmill and slowly move the transport wheels. Ask another person for help.