10
Step 10
Put the wires into the control panel. At last assemble the storage box which is in the control panel
accessory box (as pictures 12 and 13).
Pic. 12
Pic. 13
Step 11
First lock all the screws on the upright (including the inner), then lock tightly the front covers (39L/R)
with M5*25 bolts (77). Then lock the inside screw M4*15 (116) on the frame.
Step 12
As the picture shows, if the treadmill is uneven, you can use the toolkit 17-22, 34 wrench to fine-tune
it. Turn anti-clockwise to raise height, clockwise to lower the height.
