13
During exercise, if RPM has not been reached to 30, screen will appear twice the rolling string of
“RPM↑” for 5 seconds. After the message, if the RPM still not reach to 30, program will be paused and
scr
een will appear twice the rolling string of “PAUSE” for 5 seconds.
User mode
1. Press the direction keys to select USER.
2. Press Enter to get into the target value setting page.
3. After press ENTER, the TIME indicator light up and the LED indicator light shines on the
display of “TIME”. The initial value of “TIME” is “0:00”. Press direction keys to set “TIME”.
4.
After the setting of “TIME”, press ENTER, the DISTANCE indicator light up and the LED
indicator light shines on the display of “DISTANCE”. The initial value of “DISTANCE” is “0.0”.
Press direction keys to set “DISTANCE”.
5.
After the setting of “DISTANCE”, press ENTER, the CALORIES indicator light up and the LED
indicator light shines on the display of “CALORIES”. The initial value of “CALORIES” is “0”.
Press di
rection keys to set “CALORIES”.
6. The TIME
– DISTANCE – CALORIES can be cycle setting. After the target settings of TIME,
DISTANCE and CALORIES are determined, press the key “START”, and this mode starts to
operate.
If the user wants to do the operating program of graphical editing:
1.
Enter into “USER” program, the TIME indicator light up and the LED indicator light shines on
the display of “TIME”. The initial value of “TIME” is “0:00”.
2.
For editing of graphs, press “ENTER” for 3 seconds, then the first row on the Dot Matrix
flicked. At the TIME display chart will show code S-1 to show the editing.
3.
Press DIRECTION keys to set “LEVEL”. After completed setting is confirmed, press “ENTER”
to setting program of LEVEL on the next row.
4. When entering the LEVEL setting but failed on setting, the user can press ENTER and convert
to the next operation setting program. There are “S-1 ~ S-16” locations in total to set; after the
setting of those locations, the machine converts to the setting program of “TIME” for operation.
During the exercise, press “ENTER” to switch, fix and display “SPEED - TIME – DISTANCE / RPM -
CALORIES -
WATTS” screen.
During the exercise, press “PAUSE”, and the program will pause. The TIME / DISTANCE / CALORIES
display will show motion data by turns.
After pause, if you want to continue the previous exercise, press “START” and the program will
continue accumulate with the TIME/DISTANCE/CALORIES data before press pause.
Press “STOP” could stop the program, and press “STOP” again will clean the exercise date and go
back to the main program selecting page for MANUAL/ PROGRAM/ USER/ HRC/ WATTS.
Dot matrix displayed messages during exercise:
During exercise, if RPM has not been reached to 30, screen will appear twice the rolling string of
“RPM↑” for 5 seconds. After the message, if the RPM still not reach to 30, program will be paused and
screen will appear twice the rolling string of “PAUSE” for 5 seconds.
Heart rate control mode
1.
Press the direction keys to select “HRP”.
2. Press Enter to get into the target value setting page.
3.
After press ENTER, the “HEIGHT” indicator light up and the Dot Matrix display will show
“HEIGHT”. The initial value of “HEIGHT” is “170”. Press direction keys to set “HEIGHT”.
4.
After the setting of HEIGHT, press ENTER, the “AGE” indicator light up and the Dot Matrix
display will show “AGE”. The initial value of “AGE” is “30”. Press direction keys to set “AGE”.
Summary of Contents for Gemini E200
Page 1: ...USER MANUAL EN IN 14170 Elliptical trainer Gemini E200...
Page 6: ...6...
Page 16: ...16 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12...
Page 17: ...17 EXPOLDED DRAWING...