14
STEP 7
Remove the two screws (19), the two washers (20) from the middle post (2).
Pass the pulse cable (14) from the handles (11) to the middle post (2) and pass through the middle
post (2).
Attach the handles (11) to the middle post (2) using the two screws (19) and two nuts (20).
Remove the screws (17) from the back of the bracket (16). Connect the sensor cables (18) and pulse
cables (14) from the bracket (16) and then attach the bracket to the middle post (2) with the four
screws (17).
STEP 8
Attach the bottle holder (73) using the two screws (74).
Summary of Contents for Hodore ET
Page 1: ...USER MANUAL EN IN 20106 Elliptical Trainer inSPORTline Hodore ET...
Page 8: ...8 DIAGRAM...
Page 9: ...9...
Page 12: ...12...
