7
ASSEMBLY
Note:
Most of the listed assembly hardware has been packaged separately, but some hardware items
have been preinstalled in the identified assembly parts. In these instances, simply remove and reinstall
the hardware as assembly is required.
Please reference the individual assembly steps and make note of all preinstalled hardware.
Preparation
Before assembling, make sure that you will have enough space around the item; Use the present tools
for assembly; before assembling please check whether all the necessary parts are available.
It is strongly recommended to assemble this machine in two or more people to avoid possible injury.
Assembly steps
Step 1
Tighten the Front bottom tube (23) to the Main frame (1) with Allen bolts (21) and Arc washers (20);
and then attach the Rear bottom tube (3) to the Main frame (1) with Allen bolts (4) and Arc washers
(58) as shown.
