8
4. Attach the U-shaped bracket (F-28) to the right crank arm (F-7) using 2 flat washers (F-33)
and 2 screws (F-32) on each side.
5. Attach the covers (???) to the left and right crank arm (F-8/F-7) using screws (F-19).
STEP 3
1. Remove the preinstalled mounting hardware from the main base.
2. Connect the upper (C-2) and lower (G-2) cable wire.
3. Affix the handlebar post (C-1) to the main base with 4 semicircle washers (C-5), 4 spring
washers (C-4) and 4 Allen bolts (C-3).
4. Thread 4 flat washers (H-9) and 2 wave washers (H-10) onto the axle (C-6) as illustrated.
