background image

 

SAFETY INSTRUCTIONS 

 

Read the manual carefully and keep it for future reference.  

 

Always clip the safety key to your clothes or belt before starting exercising.  

 

Move naturally, forward. Do not look on your feet. Only for one person can use the product on 

the same time.  

 

Speed increase gradually, not instantly.  

 

In case of danger, press the stop button or pull out the safety key.  

 

Leave the device after it stopes moving.  

 

Follow the assembly instructions. Assembly can be done by adult person. 

 

Keep  away  from  kids  and  pets.  Do  not  leave  kids  and  pets  unattended  near  the  treadmill. 

Treadmill is for adults only.  

 

Before  starting  any  exercise,  program  ask  your  physician.  It  is  important  if  you  have  heath 

issues or ongoing treatment or have high blood pressure.  

 

Regularly  check  all  bolts  and  nuts.  They  must  be  tightened  properly.  Regularly  check  the 

treadmill for damage or signs of wear. Do not use damaged or wear treadmill.  

 

Regularly  check  the  treadmill  for  signs  of  wear  or  damage.  If  any  sharp  edge  appears  stop 

using the treadmill.  

 

Please  the  treadmill  on  flat,  dry  and  cleat  surface.  Keep  safety  distance  of  at  least  0.6  m 

around the treadmill. Do not use in humid areas. Do not place the treadmill on thick carpet.  

 

If the power cable is damaged do not use the device. Buy new one in authorized shop.  

 

Protect the treadmill from humidity and water. 

 

Place the treadmill not to cover socket.  

 

Do not use aerosol sprays in the area around treadmill.  

 

If  the  treadmill  is  running,  do  not  remove  the  protective  cover.  If  you  need  to  remove  the 

protective cover during maintenance, unplug the treadmill from socket.  

 

Always  wear  sport  clothes.  Do  not  wear  loose  clothes  that  can  get  stuck.  Always  wear  sport 

boots. 

 

Do  not  turn  on  the  treadmill  if  you  are  standing  on  it.  There  is  a  delay  when  you  turn  on  the 

treadmill. Before starting the treadmill stand on the side.  

 

Do not exercise 40 min after eating food.  

 

Always do warm ups before exercise.  

 

Do not place foreign object to ventilation or sockets.  

 

Maintenance should be done only according to the manual, to prolong the lifespan.  

 

Do not modify the product.  

 

Exercise  reasonably  and  do  not  overextend.  If  you  exercise  for  the  first  time,  hold  your 

handles firmly until you get used to the device.  

 

In case of error or damage stop the exercising immediately. If the treadmill suddenly increases 

its speed, remove the safety key.  

 

Connect the treadmill to socket after the treadmill is assembled. Use only grounded socket.  

 

If you are not using the device unplug it from socket and safety key removed.  

 

Any part of the treadmill cannot prohibit the movement of the user.  

 

Do not use outdoors.  

Summary of Contents for IN 24097






























Reviews: