8
STEP
4
Slacken the Adjusting Knob (pt.11) and pull back both knobs and locate the handlebar post (pt.4) in
the housing on the main frame (pt.1). Align the correct holes at the desired
height until the “stop” mark
and then tighten the Adjusting Knob (pt.11).
STEP 5
The Pedals (pt. 15L/15R) are marked "L" and "R"
– Left and Right. Connect them to their appropriate
crank arms with the spanner tool. The right crank arm is on the right-hand side of the cycle as you sit
on it.
NOTE: The Right pedal should be threaded on clockwise and the Left pedal anticlockwise.
