5
ASSEMBLY INSTRUCTIONS FOR TREADMILL
A flat area of 4’ x 3’ will be required to properly assemble the treadmill.
Adjustable Wrench and M8 and M10 Allen Wrench will be required to complete the assembly.
Step 1:
1.
Open the packing box, take out the above parts, and then put them on the
flat floor.
2.
Please connect the vertical tube (3) (4) to the base (2) with hexagonal
bolt M10 x20 (7) and flat washer (4).
Step 2:
Fix the mainframe (1) to the vertical tube with hexagonal
bolt M12 x65 (9) and flat washer (10).
Step 3:
Connect the sensor wire first and then tighten the meter
post (5) to the vertical tube with cross pan head screw M6
x12 (11). At last fix the meter (6) to the meter post (5).
Step 4:
