9
STEP 4:
Slacken the adjusting knob (pt. 8) and pull back and locate the
handlebar post (pt. 4) in the housing on the main frame (pt. 1). Align
the correct holes at the desired height until the “stop” mark and then
tighten the adjusting knob (pt. 8).
STEP 5:
Attach handlebar (pt. 5) to handlebar post (pt. 4) using two sets of
washers (pt. 16) and bolts (pt. 15) and tighten.
STEP 6:
Fix the upper part of handlebar decoration cover (pt. 18) using screws
(pt. 20).
STEP 7:
Slacken the knurled section of the round knob (pt. 8) and pull the knob
back, slide the seat post (pt. 2) into the seat post housing on the main
frame (pt. 1). Then select and align holes for the desired height.
Release the knob and retighten the knurled portion.
