background image

Special tips: 

1.  Before installation and operation, please read this operation manual carefully. 

2.  Please save this manual for future reference. 

3.  Product may vary slightly from the item pictured due to model upgrades. 

SAFETY INSTRUCTIONS 

WARNING  -  Read  all  instructions  before  using  this  treadmill.  It  is  important  your  treadmill 
receives  regular  maintenance  to  prolong  its  useful  life.  Failing  to  regularly  maintain  your 
treadmill may void your warranty. 

Danger 

 To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior 

to cleaning and/or service work. 

DO  NOT  USE  AN  EXTENSION  CORD:  DO  NOT  ATTEMPT TO  DISABLE  THE  GROUNDED  PLUG 
BY USING IMPORPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET. 

1)  Install  the  treadmill  on  a  flat  level  surface  with  access  to  correct  voltage  and  frequency, 

grounded outlet. 

2)  Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and 

treadmill may result. 

3)  Do not block the rear of the treadmill. Provide a minimum of 0.6 meter clearance between the 

rear of the treadmill and any fixed object. 

4)  Place your unit on a solid, level surface when in use. 

5)  Never allow children on or near the treadmill. 

6)  When  running,  make  sure  the  plastic  clip  is  fastened  on  your  clothing.  It  is  for  your  safety, 

should you fall or move too far back on the treadmill. 

7)  Keep hands away from all moving parts. 

8)  Never operate the treadmill if it has a damaged cord or plug. 

9)  Keep the cord away from heated surfaces. 

10) Do  not  operate  where  aerosol  spray  products  are  being  used  or  where  oxygen  is  being 

administered. Sparks from the motor may ignite a highly flammable environment. 

11) Never drop or insert any object into any openings. 

12) To disconnect, turn all controls to the off position, remove the safety key, and then remove the 

plug from the outlet. 

13) 

The pulse sensors are not medical devices.  Various  factors, including the user’s movement, 

may  affect  the  accuracy  of  heart  rate  readings.  The  pulse  sensors  are  intended  only  as 
exercise aids in determining heart rate trends in general. 

14) Use handrails provided; they are for your safety. 

15) Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on 

your treadmill. Quality athletic shoes are recommended to avoid leg fatigue. 

16) No adjustable part has to stand out. It could obstruct movements. 

17) Allowed temperature: 5 to 40

°C. 

18) 

Weight limit:

 160 kg 

19) 

Category:

 SB (EN957 standard) suitable for professional and/or commercial use. 

20) 

WARNING!

  The  hart  rate  monitor  may  not  be  accurate.  Overloading  during  training  may 

cause serious injury or death. If you feel any discomfort, immediately stop the exercise! 

21) Remove the safety key after use to prevent unauthorized treadmill operation. 

Summary of Contents for inCondiT6000i































Reviews: