18
•
Under ready condition,
press “MODE” to come into time countdown mode. Window “Time”
displays “30:00” and shining, you could press “SPEED+”, “SPEED-” to set exercise time from
5:00
—99:00.
•
When on distance countdown mode,
press “MODE” to enter. Window “ DIST” displays “1.0”
and shining, you could press
“INCLINE
△
”, “INCLINE
▽
”, “SPEED+”, “SPEED-” to set exercise
distance from 0.5
—99.5
•
When on calorie countdown mode,
press “MODE” to enter. Window “ CAL” displays “50” and
shining, you could press
“INCLINE
△
”, “INCLINE
▽
”, “SPEED+”, “SPEED-” to set calorie from
10
—999.
•
After finish setting time, distance or calorie mode,
you could press “start” to start the machine.
There will be 3 seconds countdown displayed on the window! After countdown, the machine
will run at the speed of 1.0km/h. You could press “INCLINE
△
”, “INCLINE
▽
”, “SPEED+”,
“SPEED-” to adjust speed and incline. Press “stop”, the machine will stop slowly.
PRESET PROGRAM
There are 99 built-in programs P1-P99
，
Under ready condition,
press “PROG.” Key continuously,
Window “PROGRAM” will display “P1-P99”
，
FAT in turn. P1-P99 are built-in programs. After
selecting specific program, press “MODE”, Window “Time” displays “30:00” and shining, you could
press “INCLINE
△
”. “INCLINE
▽
”, “SPEED+”, “SPEED-” to set exercise time from 5:00—99:00. After
setting, press “START” to start the machine. Built-in programs have 10 parts, the time for each
part=setting time / 18. When machines come into next part,
there will be a voice “Bi-Bi- Bi” for 3 times
to remind you, and speed and incline will be changed according to the built-in programs. No matter
whethe
r you have pressed “INCLINE
△
”, “INCLINE
▽
”, “SPEED+”, “SPEED-” to change speed and
incline in front parts.
After finishing one program, there will be voice “Bi- Bi-Bi” for 3 times, the machine
stop slowly and “End” will be displayed on the window. 5 seconds later, the machine will come into
ready condition.
USER-DEFINED PROGRAM
Setting for user-defined program
:
Under ready condition,
press “PROG.” Key continuously, Window “PROGRAM” will display “P1-P99”,
U1-U2, FAT in turn. U1-U2 are user-defined program. After selecting U1 or U2, p
ress “MODE” to set,
“SPEED+”, “SPEED-” to set speed, “INCLINE
△
”, “INCLINE
▽
” to set incline. After setting, press
“MODE” key to finish one part and come into next part. After finishing setting for 10 parts, press “start”
to start the machine. User-defined program will be kept in the machine forever unless you reset them.
These data can’t be lost even outage.
Special explain:
Every mode has 10 parts.
You can only press “START” key to start the machine after finishing all
parts’ setting and total exercise time setting.
Data range:
Parameter
Setting range
Displayed range
Time (minute:second)
5:00-99:00
0:00
－
99:59
Incline (%)
0-15
0-15
Speed (KM/H)
1.0-16
1.0-16
Distance (KM)
0.5-99.9
0.00
－
99.9
Heart rate (time/minute)
N/A
60-185
Calorie (cal)
10-999
0
－
999
