11
Step 4
•
Use 2 pcs of Screw M8*35 with 2 pcs of washer, 2 pcs of nut to solid multifunction frame on
base frame. (Don’t fasten screw at first)
•
Use Screw M8*80 with washer, nut to solid multifunction frame on solid tube, then fasten
screws mentioned in front steps.
•
Install 4 pcs sponge protecting bush on multifunction frame.
Step 5
•
Use 3 pcs of Screw M8*15 with 3 pcs of washer to solid massage head.
