background image

25 

 

18 

Displayed E12 on the 
screen 

Incline alarm 

Check the VR wire, AC wire, connecting 
wire of incline motor, incline motor and 
PCB, whether they are connected well or 
broken. After checking, restart the PCB. 

 

If you still can’t solve the problems after taking the solutions above, we hope that you can contact our 
dealer or company as soon as possible. 

IMPORTANT NOTICE 

 

This treadmill comes with standard safety regulations and is only suitable for home use. Any 

other use is prohibited and may be dangerous to users. We are not responsible for any injury 
caused by improper and forbidden use of the machine. 

 

Consult  your  doctor  before  starting  training  on  the  treadmill.  Your  doctor  should  evaluate 

whether  you  are  physically  fit  to  use  the  machine  and  how  much  effort  you  are  able  to 
undergo. Incorrect exercise or switching of the body can harm your health. 

 

Carefully read  the  following tips and  exercises. If  you experience  pain, nausea,  breathing, or 

other  health  problems  during  exercise,  immediately  stop  the  exercise.  If  the  pain  persists, 
contact your doctor immediately. 

 

This treadmill is not suitable as a professional or medical purpose. It can also not be used for 

healing purposes. 

 

The heart rate monitor is not a medical device. It provides only approximate information about 

your average heart rate, and any suggested pulse rate is not medically  binding. Accumulated 
data may not always be accurate regarding uncontrollable human and environmental factors. 

ENVIRONMENT PROTECTION 

After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the 
local laws and environmentally friendly in the nearest scrapyard. 

By  proper  disposal  you  will  protect  the  environment  and  natural  sources.  Moreover,  you  can  help 
protect  human  health.  If  you  are  not  sure  in  correct  disposing,  ask  local  authorities  to  avoid  law 
violation or sanctions. 

Don’t put the batteries among house waste but hand them in to the recycling place. 

TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS 

General Conditions of Warranty and Definition of Terms 

All  Warranty  Conditions  stated  hereunder  determine  Warranty  Coverage  and  Warranty  Claim 
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 89/2012 Coll. Civil 
Code,  and  Act  No.  634/1992  Coll.,  Consumer  Protection,  as  amended,  also  in  cases  that  are  not 
specified by these Warranty rules. 

The  seller  is  SEVEN  SPORT  s.r.o.  with  its  registered  office  in  Borivojova  Street  35/878,  Prague 
13000, Company Registration Number: 26847264, registered in the Trade Register at Regional Court 
in Prague, Section C, Insert No. 116888. 

According to valid legal regulations it depends whether the Buyer is the End Customer or not. 

“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not 
conclude and execute the Contract in order to run or promote his own trade or business activities. 

“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the 
purpose  of  using  the  Goods  or  services  for  his  own  business  activities.  The  Buyer  conforms  to  the 
General Purchase Agreement and business conditions. 

Summary of Contents for Mendoz 4v1




























Reviews: