14
5.
Press FAST/ SLOW or UP/ DOWN to set time.
MAINTENANCE
Proper maintenance is very important to ensure a faultless and operational condition of the treadmill. Improper
maintenance can cause damage to the treadmill or shorten the life of the product.
All parts of the treadmill must be checked and tightened regularly. Worn out parts must be replaced immediately.
BELT ADJUSTMENT
You may need to adjust the running belt during the first few weeks of use. All running belts are properly set at
the factory. It may stretch or be off centre after use. Stretching is normal during the break-in period.
ADJUSTING THE BELT TENSION:
If the running belt feels as though it is “slipping” or hesitating when you plant you foot during a run, the tension
on the running belt may have to be increased.
TO INCREASE THE RUNNING BELT TENSION:
1.
Place 8mm wrench on the left belt tension bolt. Turn the wrench clockwise 1/4 turn to draw the rear
roller and increase the belt tension.
2.
Repeat STEP 1 for the right belt tension bolt. You must be sure to turn both bolts the same number of
turns, so the rear roller will stay square relative to the frame.
3.
Repeat STEP 1 and STEP 2 until the slipping is eliminated.
