4
SPECIAL SAFETY PRECAUTIONS
POWER SOURCE
Choose a place within reach of a socket when placing the treadmill.
Always connect the appliance to a socket with a grounded circuit and no other appliances connected to
it. It is recommended not to use any extension cords.
A faulty grounding of the appliance can cause the risk of electrical shocks. Ask a qualified electrician to
check the socket in case you do not know if the appliance is grounded appropriately. Do not modify the
plug provided with the appliance if it is not compatible with your socket. Ask a qualified electrician to
install a suitable socket.
Sudden voltage fluctuations can seriously damage the treadmill. Whether to change or switch on and off
other appliances can cause peak voltages, over-voltage or interference voltage. To limit the danger of
damage to the treadmill, it should be equipped with an over-voltage protective device (not included).
This appliance is designed for use with ~220 - ~240 Volt rated voltage.
Keep power cord away from the carrying roller. Do not leave the power cord below the striding belt. Do
not use the treadmill with a damaged or worn out power cord.
Unplug before cleaning or engaging in maintenance work. Maintenance should only be done by
authorized service technicians, unless otherwise stated by the manufacturer. Ignoring those instructions
would automatically void the warranty.
Inspect the treadmill before every use to make sure that every part is operational.
Do not use the treadmill outdoors, in a garage or under any kind of canopy. Do not expose the treadmill
to high humidity or direct sunlight.
Never leave the treadmill unattended.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Make sure the striding belt is always tense. Start the striding belt before stepping on it.
ASSEMBLY
Before starting with the assembly of this fitness device, carefully read through the set up steps of
ASSEMBLY INSTRUCTIONS. We also recommend that you view the ASSEMBLY DRAWING prior
to assembly.
Remove all packaging material and place the individual parts on a free surface. This will provide you
with an overview and will simplify assembly.
Use the CONTENTS OF PACKAGE to check that all components have been supplied. Dispose of the
packaging material only after the trainer is fully assembled.
Please consider that there is always the risk of injury when using tools and carrying out technical
activities. Please proceed with care when assembling the device.
Make sure you have a hazard-free working environment and do not, for example, leave tools lying
around. Deposit the packaging material in such a way that it does not pose a danger. Foil/plastic bags
are a potential risk of suffocation for children!
Take your time when viewing the drawings and then assemble the device according to the series of
illustrations.
The device must be carefully assembled by an adult person. If necessary, request aid from another
technically talented person.
WARNING:
Use extreme caution when assembling this treadmill. Failure to do could result in injury.