1
Safety Instructions
1. Safety Instructions
WARNING:
Please be advised to follow the instructions below for safety. Failure to do so
could result to potential dangers that may cause property loss, personal injury or death.
1.
The power supplies in the system may produce high voltages and energy hazards that
may cause personal injury. For your safety, please do not attempt to remove the cover
of the system to remove or replace any component without assistance provided by
Inspur. Only service technicians trained by Inspur are authorized to remove the cover of
the host, and to remove and replace internal components.
2.
Please connect the equipment to the appropriate power supply. Use only power supplies
with the correct voltage and electrical specifications according to the label. To protect your
equipment from damages caused by a momentary spike or plunge of the voltage, please
use relevant voltage stabilizing equipment, or uninterruptible power supplies.
3.
If you must use an extension cable, please use a three-core cable with properly
grounded plugs. Observe extension cable ratings. Ensure that the total rating of all
equipment plugged into the extension cable does not exceed 80 percent of the ratings
limit for the extension cable.
4.
Please be sure to use the power supply components that come with the server, such as
power cables, power socket (if provided with the server) etc. For your safety, please do
not replace power cables or plugs randomly.
5.
To prevent electric shock dangers caused by leakage in the system, please make sure
that the power cables of the system and peripheral equipment are correctly connected
to the earthed/grounded power socket. Please connect the three-core power cable
plug to the three-core AC power socket that is well earthed and easy to access. Be sure
to use earthing /grounding pin of power cables and do not use the patch plug or the
earthing/grounding pin unplugged with cables. In the case that the earthing/grounding
conductors are not installed and it is uncertain whether there are appropriate earthing/
grounding protections, please do not use or attempt to operate the equipment. Contact
and consult an electrician.
6.
Please do not push any objects into the openings of the system. Doing so may cause
fire or electric shock.
7.
Please place the system far away from the cooling plate and heat sources, and be sure
Summary of Contents for NF3120M5
Page 1: ...Inspur Server User Manual NF3120M5 V1 0 ...
Page 73: ...67 BIOS Setup ...
Page 172: ...166 ...
Page 176: ...170 ...
