54
3.2.4.4.1 Add User
Add User interface is used to add a BMC user through BIOS, after addition, it will
take effect immediately, and the user will be added into the BMC user list.
Add User Interface Instruction Table
Interface Parameters
Function Description
Default
User Name
User name settings
--
User Password
User password settings
--
Channel NO
BMC channel settings, need to be set to1 or 8
0
User Privilege Limit
User privilege settings, option parameters:
No Access
User
Operator
Administrator
No Access
Specific operations are as follows:
a
、
Select the User Name option, press Enter, the User Name box will pop up,
input the user name to set, after configuration is completed, press Enter to
confirm.
b
、
Select the User Password option, press Enter, the User Password box
will pop up, input the user password to set, the password length is 1-16
characters; press Enter, Confirm New User Password box, input the new
password again, and press enter to confirm. If the input password is invalid
or the two passwords you entered do not match, it will prompt “Invalid
Password”.
c
、
Channel NO is set to 1 or 8.
d
、
User Privilege Limit option, set privilege for the new user, after