62
USB2.O DISK 1100, USB2.O DISK 1100 etc., select one through up and down keys,
i.e. USB2.O DISK 1100, and press Enter, to select USB DOS disk as the first boot
device for the system.
3.2.7 Save & Exit
Save & Exit interface is used to set the options related with saving BIOS parameter
modification and exiting.
Save & Exit Interface Instruction Table
Interface Parameters
Function Description
Save Changes and Exit
To save changes and exit
Discard Changes and Exit
To discard changes and exit
Save Changes and Reset
To save changes and reset
Discard Changes and Reset
To discard changes and reset
Save Changes
To save changes
Discard Changes
To discard changes
Restore Defaults
To restore defaults
Save as user Defaults
To save as user defaults
Restore user Defaults
To restore user defaults
Boot Override
To reload boot device, you could select all boot
devices in the following.
3.3 BIOS Update
For BIOS update, you could select to update under DOS or OS. Here is the detailed
introduction of BIOS update under DOS and Linux system.
